Related Manuals for COMAC Abila 42B
Summarization of Contents
General Safety Regulations
General Safety Warnings
Crucial safety instructions to prevent harm to operator and damage to the machine.
Machine Preparation
Handling and Unpacking the Machine
Instructions for safely handling, unpacking, and preparing the machine for use.
Moving the Machine
Procedures for safely moving the machine using pallets and wedges.
Battery Types and Maintenance
Details on approved battery types, maintenance, and disposal procedures.
Installing and Connecting Batteries
Steps for correctly installing and connecting the batteries in the machine.
Battery and Electrical Connections
Procedures for connecting batteries in series and the main electrical system connector.
Recharging Batteries (External Charger)
Steps for recharging batteries using an external battery charger.
Recharging Batteries (Built-in Charger)
Instructions for recharging batteries using the machine's built-in charger.
Battery Indicator and Charging Alerts
Explanation of the battery indicator display and charging warnings.
Instrument Panel Components
Identification and description of components on the instrument panel.
Machine Components Identification
Identification of rear, front, and side components of the machine.
Squeegee Assembly and Adjustment
Steps for assembling the squeegee and adjusting its height.
Squeegee Inclination Adjustment
Procedure for adjusting the squeegee's backward tilt for optimal drying.
Recovery Tank and Solution Tank
Instructions for ensuring the recovery tank is empty and preparing the solution tank.
Filling Solution Tank (Versions without CDS)
Steps for filling the solution tank with water and detergent.
Filling Solution Tank (Versions with CDS)
Steps for filling the solution tank using the CDS system. Includes detergent recommendations.
Brush Assembly (Single Brush Head)
Instructions for assembling a single brush head onto the machine.
Splash Guard Rubber Assembly
Procedure for attaching the splash guard rubber to the single brush head.
Brush Assembly (Double Disc Brush)
Steps for assembling double disc brushes onto the machine.
Splash Guard Rubber for Disc Brush
Instructions for assembling the splash guard rubber onto the disc bi-brush base.
Detergent Solution Regulation (WFC/No CDS)
How to regulate detergent flow for versions without CDS.
Detergent Solution Regulation (No WFC/No CDS)
Adjusting detergent flow for versions without WFC and CDS.
Detergent Solution Regulation (CDS/No WFC)
Adjusting detergent and water flow using the CDS system.
Detergent Pump Connection (CDS Versions)
Steps to prime and connect the detergent pump for CDS versions.
Potentiometer Adjustment (BT Versions)
How to adjust the forward speed using the potentiometer on BT versions.
Reverse Function (BT Versions)
How to activate and use the reverse function on BT versions.
Work Operations
Preparing to Work
Steps to connect power, turn on the machine, and check initial settings.
Starting Work and Solution Adjustment
Procedures for lowering components, starting suction, and adjusting solution flow and speed.
Recovery Tank Overflow Device
Explanation of the recovery tank's overflow float and actions when activated.
End of Work Procedures
Draining and Securing the Machine
Steps to drain the machine, disable motors, and secure it.
Storing the Machine
Guidelines for properly storing the machine when not in use.
Daily Maintenance
Cleaning the Recovery Tank
Instructions for cleaning the recovery tank and suction pipe.
Cleaning the Suction Filter
Procedure for removing and cleaning the suction filter.
Cleaning the Suction Tube Filter
Steps to clean the filter located in the suction tube.
Disassembling and Cleaning the Squeegee
How to disassemble, clean, and reassemble the squeegee.
Cleaning the Clean Water Filter
Instructions for removing and cleaning the clean water filter.
Disassembling Brush (Single Brush Head)
Steps to detach the brush from the base for cleaning or replacement.
Disassembling Brush (Dual Brush Head)
Procedure for removing dual brush heads from the machine.
Weekly Maintenance
Cleaning the Squeegee Tube
How to check and clean the squeegee tube for optimal suction.
Checking the Wheel Brake
Procedure for checking and adjusting the wheel brake.
Cleaning the Solution Tank
Steps to clean the solution tank and its filter.
Replacing Squeegee Rubbers
Instructions for replacing worn squeegee rubbers on the front and rear.
Extraordinary Maintenance
Cleaning the Dosing System (CDS Versions)
Procedure for cleaning the CDS dosing system after periods of inactivity.
Troubleshooting
Insufficient Water on Brush
Checks and solutions for low water supply to the brushes.
Machine Does Not Clean Well
Diagnosing and resolving issues with the machine's cleaning performance.
Squeegee Not Drying Perfectly
Troubleshooting steps for imperfect drying by the squeegee.
Excessive Foam Production
Causes and solutions for excessive foam generation during operation.
Electric System Safety (E Versions)
Information on the thermal trip unit and its function for E versions.
Disposal Procedures
Machine Disposal Guidelines
Guidelines for disposing of the machine and its components responsibly.
Brush and Pad Selection
Brush Types and Characteristics
Explanation of Polypropylene and Abrasive brush types and bristle thickness.
Pad Holder Types
Description of traditional and Centre Lock pad holders for cleaning.
Brush Selection Table
Table detailing brush options for different Abila machine models.
EC Declaration of Conformity
Compliance with EU Directives and Standards
Declaration of compliance with EU directives and relevant safety standards.
Need help?
Do you have a question about the Abila 42B and is the answer not in the manual?
Questions and answers