Denon AVR-2805 Operating Instructions Manual page 24

Denon user guide av surround receiver avr-2805
Hide thumbs Also See for AVR-2805:
Table of Contents

Advertisement

ENGLISH
3-5 Auto Tuner Presets
Use this to automatically search for FM broadcasts and store up to 56 stations at preset channels A1 to 8, B1
to 8, C1 to 8, D1 to 8, E1 to 8, F1 to 8 and G1 to 8.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, use the "Manual tuning" operation to
tune in the station, then preset it using the manual "Preset memory" operation.
1
Select "Auto Tuner Presets"at the Input Setup Menu.
(Remote control unit)
2
Display the Auto Preset Memory screen.
(Remote control unit)
3
Press the CURSOR left button to select "Yes".
"Search" flashes on the screen and searching begins.
"Completed" appears once searching is completed.
The display automatically switches to screen.
(Remote control unit)
4
Setting the Advanced Playback
1
Select "Advanced Playback" at the System Setup
Menu.
(Remote control unit)
2
Display the Advanced Playback Menu screen.
(Remote control unit)
24
4-1 Setting the Audio Delay
This function allows you to adjust the time delay of the video and audio signals and store these settings for the
different input sources.
The setting is made while watching a DVD or other software, so it is not made here.
By default, this is not displayed when no digital signals are being input.
For instructions on making the setting, refer to page 44.
NOTE:
The audio delay setting does not apply when it plays in the EXT. IN mode or in the analog input direct mode or
stereo mode (TONE DEFEAT "ON").
4-2 Setting the Dolby Digital Setup
Sets the down-mixing method when not using a center speaker or surround speakers.
OFF:
The dynamic range is not compressed.
ON:
The dynamic range is compressed automatically according to the combination of speakers being
used.
1
Select "Dolby Digital Setup" at the Advanced Playback
Menu.
(Remote control unit)
2
Press the ENTER button.
Display the Dolby Digital Setup screen.
(Remote control unit)
3
Select "ON" if you want to use the Compression,
"OFF" if you do not want to use it.
(Remote control unit)
NOTE:
When a center speaker or surround speakers, are not used the sound is played from the front speakers.
Set "Compression" to "ON" if it seems that sound is distorted because the input level exceeds the
allowable input for the front speakers.
4
Enter the setting.
The Advanced Playback Menu reappears.
(Remote control unit)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents