Table of Contents
Advertisement
Symptom
See if the same problem persists after the
iAUDIO does not
power on.
adapter is connected.
iAUDIO does not respond at all.
I can't hear any
See if there is an AV file saved in the
sound at all, or there
device memory.
is noise.
You also can see if the remote control or earphone is connected to the device, or if the port is covered
by any foreign objects. (If a foreign object contaminates the device, it can create noise.) If an audio file
is damaged, noise can result or the sound can be cut out.
Set to English in the Country/Language menu or use the File Name menu in the ID3
The letters on the LCD
are all broken.
tag control menu. However, if all the iAUDIO devices have the same problem, then the
device is developed based on Hangul (the Korean alphabet), therefore some of special
fonts/language may be broken.
If they are connected by a USB cable, then turn the power ON. A separate driver has to
The computer doesn't
recognize the device.
be installed for iAUDIO that is running under Windows OS except for Windows 2000/XP.
Connect it to the computer and make sure that the device is recognized by checking in
JetShell doesn't
recognize the device
Windows Explorer. Then run JetShell.
and says "There is
Please refer to "Installing the Device Driver".
no iAUDIO".
For example, if it indicates 20Gb as 18.6Gb after formatting to FAT 32, then this is quite
The hard disk memory
indicated/used is a
normal. iAUDIO memory shares the space that is used as a system domain. Therefore, if
lesser amount. (e.g. it
the system domain that is necessary to run the iAUDIO driver regularly is excluded, then
indicates 18.6 GB for
the actual indicated HDD memory will be a little smaller.
20GB.)
iAUDIO uses FAT32. Due to the
After saving hundreds
of files in the Root
limitations of FAT32, avoid saving too
folder, iAUDIO does
many files in the Root directory.
not work or malfunc-
tions.
Procedure
If the internal battery is completely discharged,
then recharge it with the adapter. Depending on the
discharge status, it can take up to 10 seconds for the
power to come back on even after connecting the
adapter.
Press the RESET. (* RESET will cut off the
power while not affecting the device itself.)
iAUDIO does not work when there are no
saved files in it.
This is a limitation from Windows 98. It is rec-
ommended to create subfolders for Windows
2000 and XP as well.
T r o ubl e shoot i n g
Explanation
39
iAUDIO X5V
Advertisement
Table of Contents
