Table of Contents
Advertisement
I n st r uct i o ns f o r D i f f e r e nt M odes
20
Playlist (M3U Playlist) Setup
■
A folder called "PLAYLIST" already exists in the upper most folder of the hard disk, and the user may create
a Playlist (M3U) as he/she prefers. (An M3U file is a list file in which the sequence of audio files is entered.)
1. To create an M3U file, connect iAUDIO to a PC with the USB cable.
[Please refer to "1) Before Using This Product → 7. Connecting to a PC."]
2. Run the program (JetAudio, WinAmp) that can create M3U files.
3. Move the files in iAUDIO to each program's Playlist to edit and save them as M3U files.
4. Save the created M3U files in the "PLAYLIST" folder in iAUDIO.
5. Disconnect iAUDIO and the PC. Please refer to "1. Before Using This Product → 8. Saving Files and
Disconnecting from a PC."
6. Turn iAUDIO ON, and then you may playback the M3U files that have been saved in the "PLAYLIST"
folder using the Navigator.
- An M3U file is not an audio file. It is only a playlist of audio files. Therefore, deleting an M3U file will not delete the audio file.
- Be sure to save M3U files only in the "PLAYLIST" folder.
- You must create an M3U file for the files saved in iAUDIO while iAUDIO is connected to a PC. If you create an M3U file in the PC,
or create one containing files saved in the PC after the device has been connected to the PC, the M3U file will not playback properly.
- M3U file delete is only possible in USB Host mode or when the device is connected to a PC. Please refer to "3. Instructions for
Different Modes → 4. USB Host Mode or 1. Before Using This Product → 7. Connecting to a PC."
- M3U files will be recognized up to 128KB, and the maximum number of folders that files can be saved in is 99, and the maximum
number of songs that can be supported in an M3U file is 999.
3. Voice Record Mode (Recording Voice with Built-In Mic)
Voice Record mode is a feature that can record voice with the built-in microphone.
1. Turn the product ON and move to Voice Record mode. Please refer to "2. Basic Instructions → 2. Basic
Operations for Switching Modes."
2. Press the "REC" button to start recording.
3. Pressing the "REC" button again will stop the recording.
4. Press the "PLAY" button to playback recorded files.
- To playback recorded files using features such as search, you may run the files in Navigator using Digital AV mode.
- If you were running Voice Record before turning the product off, it will resume in Voice Record mode when the power is turned on again.
- Recording consumes more battery power than usual. Be sure to fully charge the battery before recording.
- When you are listening to music using the Recording feature setup for the "REC" button, you may still start recording immediately
by pressing and holding the "REC" button.
[Please refer to "4) Detailed Description of Features by Menu → 7. General → Controls" section.
- The recorded file can be verified in "VOICE" of the upper most folder.
- The quality and capacity of the recording depends on the recording quality setup in addition to the reception. Please refer to
"4. Detailed Description of Features by Menu → 8. Recording."
- Maximum capacity for a single recording is 268MB. A new file will be created and start recording if the capacity is exceeded.
- If there is less than 128MB space available on the hard disk, the recording will not start. If the available space becomes less than
128MB during recording, the recording will end.
- Up to 999 files can be recorded.
iAUDIO X5V
Advertisement
Table of Contents
