Table of Contents
Advertisement
Savi n g F i l e s a nd D i s connect i n g f r o m a P C
12
Saving Files and Disconnecting
1. Open Windows search while the iAUDIO X5V is connected to your PC.
2. Save audio files, graphic files, encoded files and other files to be used in iAUDIO X5V to the drive.
3. After saving the files, click the
3. After saving the files, click the
3. After saving the files, click the
4. Click the following popup message when it appears.
5. The"Safely remove hardware"window appears. At the same time, the following picture appears
on the iAUDIO X5V LCD.
6. Click the OK button and then disconnect the USB cable.
- This product uses a hard disk and must confirm the safe removal of hardware before disconnecting.
- If the following message appears, it does not mean product failure. You may execute safe hardware removal after a few moments.
Turning the Power ON
Turning the Power OFF
• The power will turn off when the power switch is pushed upward for 1-2 seconds.
• The LCD will turn off when the power switch is slightly pushed upward, but the power remains on. The CD will turn
on when the power switch is slightly pushed upward again.
iAUDIO X5V
icon in the PC tray.
The power will turn on when the power switch is pushed upward for 1~2 seconds.
Advertisement
Table of Contents
