Related Manuals for Westermo Viper-112A-P8-LV
Summarization of Contents
Legal and Software Information
Software Tools
Mention of related software tools available on the Westermo website.
Legal Information
Disclaimer regarding document accuracy and Westermo's liability.
License and Copyright for Included Free/Libre Open Source Software
Details licensing and copyright for included third-party FLOSS software.
Safety Precautions
Before Installation
Guidelines for safe installation of the unit by qualified personnel.
Before Mounting, Using, or Removing
Precautions for safe handling and removal of the unit, including electrical hazards.
Care, Maintenance, and Environmental Protection
Care Recommendations
Guidelines for maintaining unit operation and fulfilling warranty obligations.
Maintenance
Information on required maintenance for the unit.
Environmental Protection
Guidance on proper disposal of electronic waste.
Product Description and Models
Designed for Harsh Industrial Environments
Overview of the Viper-12A-PoE series for industrial applications.
Product Models
Details on available Viper x12A-PoE models and their specifications.
Interface Specifications
DC Power Port
Technical specifications for the DC power input port.
100 Mbps Non-PoE Ports
Specifications for 100 Mbps Ethernet ports without PoE functionality.
Gbps Non-PoE Ports
Specifications for Gigabit Ethernet ports without PoE functionality.
PoE Ports
Specifications for Power over Ethernet ports.
USB Port
Specifications for the USB port used for configuration and logging.
Console Port
Specifications for the serial console port for CLI access.
Location of Interface Ports and LED Indicators
Diagram showing port locations and LED status indicators.
Connector Pinout
Power Connectors (HV/LV)
Pin assignments for High Voltage and Low Voltage power connectors.
CON and USB Connectors
Pin assignments for Console and USB connectors.
Ethernet Connectors (100 Mbps/Gbps)
Pin assignments for 100 Mbps and Gigabit Ethernet connectors.
Connection and Configuration Procedures
Connection to Console Port
Steps for connecting to the unit's console port for CLI access.
Connection to USB Port
Instructions for using the USB port for configuration and log files.
LED Indicators
ON LED Status
Description of the ON LED states and their meanings.
RSTP LED Status
Description of the RSTP LED states and their meanings.
FRNT LED Status
Description of the FRNT LED states and their meanings.
DC LED Status
Description of the DC LED states and their meanings.
Port LEDs (X1-X12)
Description of LEDs for Ethernet ports X1 through X12.
PoE LED Status
Description of the PoE LED states and their meanings.
Installation and Operation Guidelines
Wall Mounting
Instructions for mounting the unit to a wall surface.
Cable Connection
Guidelines for connecting cables and tightening connectors.
Unit Removal
Procedure for safely removing the unit.
Cooling Requirements
Information on the unit's convection cooling system.
Hot Surface Warning
Caution regarding the unit's surface temperature during operation.
EN 45545-2 Mounting Notes
Specific mounting notes related to EN 45545-2 fire safety standards.
Getting Started and Configuration
Getting Started Overview
Introduction to the Westermo Operating System (WeOS) management tools.
Configure Unit via Web Browser
Steps and default credentials for configuring the unit using a web browser.
Reference Documents and Maintenance Procedures
Reference Documents
List of related reference documents, including the Management Guide.
Cable Factory Reset Procedure
Procedure for performing a factory default reset using Ethernet cables.
Contact Information and Sales Units
Westermo Sales Units
Contact details for Westermo sales units worldwide.
Regional Sales Contacts
Specific contact information for China, France, Germany, North America, Singapore, Sweden, and UK.
Need help?
Do you have a question about the Viper-112A-P8-LV and is the answer not in the manual?
Questions and answers