Table of Contents
Advertisement
INSTALLATION / OPERATION
V 22.454
ECS 300.2
ECS 500.4
ECS 1200.1
ECS 1200.1
HIGH PERFORMANCE
AUDIO POWER AMPLIFIER
EINBAU /BEDIENUNG
INHALT
Einführung
Einbau
11
Betrieb
16
Technische Daten
19
Einführung
Vielen Dank, dass Sie sich für eine ETON
Endstufe entschieden haben.
Bitte lesen Sie vor Gebrauch des
Verstärkers die Bedienungsanleitung
sorgfältig. Sie enthält viele Hinweise für den
produkteigenen Umgang mit Ihrem
Verstärker.
Die Seriennummer finden Sie an der
Außenseite der Verpackung. Bitte notieren
Sie diese Nummer in dem unten dafür
vorgesehenen Feld.
Serien-Nummer:
Modell-Nummer:
CONTENTS
2
Introduction
3
8
Introduction
Thank you for purchasing the ETON Car
Amplifier.
Please read the installation manual care-
fully before using the amplifier. The manual
contains many tips for proper handling of
your amplifier.
The serial number can be found on the
outside of the box. Please record it in the
space provided below as your permanent
record.
Serien-Nummer:
Modell-Nummer:
2
2
3
8
11
16
20
Advertisement
Table of Contents
Related Manuals for Eton ECS 500.4
Summarization of Contents
Safety Instructions
Attention!
Warning about potential danger to personal injury or property.
Volume and Driver Awareness
How sound systems can impair awareness and cause danger while driving.
Before Installation
Crucial steps before installing components to prevent accidents.
Safety Instructions (Continued)
Wiring
Guidelines for using appropriate cables and routing them safely.
Power Supply
Instructions for safely disconnecting the battery and installing fuses.
Safety Instructions (Continued)
Danger of Short Circuit or Fire
Warning about potential causes and risks of short circuits and fires.
Danger of Accidents
Risks associated with improper mounting and high sound levels.
Safety Instructions (Continued)
Connections and Adjustments
Proper grounding and setting amplifier switches correctly.
General Compendium
General safety points regarding protection of persons and animals.
Design Features
Power Fuse (A)
Information on checking and replacing the main fuse.
Power Connector Terminals (B)
Description of power, ground, and remote terminals.
+12V REM Output (C)
Explanation of the +12V switched voltage output for other devices.
+12V REM Switched Input (D)
How the amplifier is switched on via the radio signal input.
Design Features (Continued)
Signal Detection (SIG)
How the amplifier detects the radio music signal and its turn-off condition.
Remote Turn-on (OFF)
Condition for amplifier activation via the +12V remote wire.
RCA Input Jacks (E)
Standard RCA jack for signal level input from radio or other sources.
Sensitivity Control (F)
Adjusting the amplifier's output level to match source units.
Design Features (Continued)
Crossover Filter Switch (G)
Selecting filter modes: Flat (all pass), LPF (low pass), HPF (high pass).
Adjustable Crossover Frequency (H)
Setting the crossover frequency point for filters.
Crossover Multiplier Range Switch (I)
Multiplier selection for crossover frequencies.
Subsonic Filter (J)
Filtering frequencies below the audio range to protect subwoofers.
Installation
General Installation Considerations
Planning system layout and wiring routes for easy access and adjustment.
Safety Precautions
Warning to consult a technician if unsure about installation.
Step-by-Step Installation Guide
Followed by numbered steps for safe and proper installation.
Installation (Continued)
Grounding Connection
Ensuring a clean, short ground connection to the vehicle chassis.
Engine Compartment Mounting
Warning against mounting in the engine compartment; voids warranty.
Passenger Compartment Mounting
Ensuring sufficient air circulation for cooling when mounting in passenger areas.
Battery and Charging
Recommendations for battery capacity and capacitor for optimal performance.
Installation (Continued)
Power Cable Fusing
Mandatory fusing of the B+ cable within 30cm of the battery.
Cable Connections
Using suitable clamps and ensuring proper ground connection.
Turn-on Wire Connection
Connecting the REM terminal to a switched 12V source.
Secure Mounting
Mounting securely, avoiding plastic or cardboard panels.
Installation (Continued)
Signal Input Connection
Connecting RCA cables or high-level inputs to the amplifier.
Speaker Connection
Connecting speakers with correct polarity and avoiding chassis ground.
Final Wiring Check
Performing a final check of all connections for accuracy and security.
Installation (Continued)
Remote Level Control Mounting
Mounting the remote level control for easy access.
Staggered Power (ECS 500.4)
Description of dual power supplies and output sections for front and rear channels.
Staggered Power (ECS 1200.1)
Details on Master-Slave parallel operation for increased power output.
Operation
Adjusting Level
Procedure for setting the amplifier's input level to avoid distortion.
Adjusting Crossover (X-OVER) - ECS 1200.1
Procedure for setting the crossover point on the ECS 1200.1 model.
Adjusting Crossover (X-OVER) - Other Models
Setting HPF (high pass) or Flat (all pass) modes for other amplifier models.
Operation (Continued)
Low Pass Filter Mode
Setting the LPF mode to pass frequencies below the cut-off point.
Subsonic Filter
Using the subsonic filter to prevent low frequencies from reaching subwoofers.
Strapping Amplifiers (ECS 1200.1)
Instructions for connecting two ECS 1200.1 amplifiers together.
Operation (Continued)
Strapping Amplifiers - Master/Slave Setup
Selecting master/slave roles and connecting RCA cables for strapping.
Strapping Amplifiers - Speaker Connections
Wiring speaker outputs from master and slave amplifiers correctly.
Technical Specifications
Model and Dimensions
Specifications for ECS 300.2, ECS 500.4, and ECS 1200.1 models.
RMS Power Output
RMS power ratings at different impedance levels for each model.
Bridged RMS Power
Bridged power output ratings for each amplifier model.
Measuring Current
Current draw specifications at different impedance loads.
Technical Specifications (Continued)
Signal to Noise Ratio
Signal to noise ratio (A-weighted) for each amplifier model.
Total Harmonic Distortion (THD)
Harmonic distortion levels for front and rear channels.
Damping Factor
Damping factor specifications for amplifier models.
Channel Separation
Specifications for channel separation in amplifier models.
Need help?
Do you have a question about the ECS 500.4 and is the answer not in the manual?
Questions and answers