Accessing Protected Mode Using Centreware Is; Accessing Load Paper Timeout - Xerox 8400B - Phaser Color Solid Ink Printer Reference Manual

Using CentreWare IS
To select Intelligent Ready mode or to schedule warmup/standby settings:
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Select Properties.
4.
Select the General folder on the left sidebar.
5.
Select Warmup.
6.
Click the Warmup Mode drop-down list and select Intelligent Ready, Scheduled, or Job
Activated.
7.
If you select Scheduled in Step 5, make selections for each day's warmup setting and
standby setting.
8. Click Save Changes at the bottom of the screen.
Note
Although the front panel selections only allow you to turn Intelligent Ready Mode on or
off, CentreWare IS allows you to specify particular printer Warmup Modes and settings.

Accessing Protected Mode Using CentreWare IS

To enter or exit Protected Mode:
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4.
Click the General folder on the left sidebar, then click Printer Defaults.
5.
Click the Front Panel Menu drop-down list, then select On or Off.
Select On to have all menus available.
■
■ Select Off to limit the printer setup items.
6.
Click Save Changes at the bottom of the page.

Accessing Load Paper Timeout

When your print job is formatted for a type or size of paper that is not loaded in the printer, the
printer's front panel displays a message requesting you to load the appropriate paper. The Load
Paper Timeout controls the amount of time the printer waits before printing on another type or
size of paper.
To change the load paper timeout, use either:
■ The printer's front panel
■ CentreWare IS
Phaser® 8400 Color Printer
1-16
Printer Settings