Xerox 8400B - Phaser Color Solid Ink Printer Reference Manual page 187

Moving the Printer
Caution
Parts of the printer may be hot. To avoid personal injury or damage to the printer, allow
30 minutes for it to cool before moving or packing the printer. This allows the ink to
solidify.
■ Always allow the printer to cool before it is moved to avoid ink spills which can damage
the printer.
■ Use the Fast Shutdown mode at the front panel
best results.
■ Never move the printer if you receive a
at the printer's front panel. This message means the printer is not ready to be moved. If the
printhead is not locked, the printer can be damaged during shipment.
Always look at the green flag in the exit tray to ensure that it is in the raised position.
■
When the green flag is raised the printhead is locked.
Always turn off the printer using the power switch, located under the interface cover on
■
the right side of the printer, and unplug all cables and cords. Do not turn off the printer by
pulling the power cord or using a power-strip with an on/off switch.
■ The printer is heavy and must be lifted by two people. The illustration below shows the
proper technique for lifting the printer.
(Shut Down for Moving
Power Down Error-Head not Parked
28 kg
60 lbs.
Phaser® 8400 Color Printer
A-4
Appendix A
Printer) for
message
8400-099