Table of Contents
Advertisement
Adaptive Pressure Controller
PM-4 & 5 for Gate Valve Control System
This manual is valid for product with the
product identification number
FABR. NO. 641PM - . 6 . . - . . . .
configured with Software Version
64PM.3I.00
The product identification is specified on the rear panel of each PM controller:
Made in Switzerland in 20 . .
Patented
641P . - . 6 . . - . . . . - . . . .
Read these «Installation, Operating and Maintenance Instructions» (IOMI) and the enclosed
«General Safety Instructions» carefully before you start any other action.
Table of content
1 Intended Use of Product .......................................................................................................................... 2
1.1
Technical Data................................................................................................................................. 2
2 Installation ............................................................................................................................................... 2
2.1
Content of VAT PM Controller Delivery ............................................................................................ 2
2.2
Hardware Installation ....................................................................................................................... 2
2.3
PM Configuration (setup sequence) ................................................................................................. 4
3 Operation ................................................................................................................................................ 5
3.1
Local Mode (PM-4 with Service Box only) ........................................................................................ 5
3.2
Remote Mode (PM-5 if Interface installed only) ................................................................................ 5
3.3
Power Failure / Power Failure Option (PFO)..................................................................................... 5
4 Preventive Maintenance .......................................................................................................................... 6
5 Spare Parts / Retrofit Options .................................................................................................................. 7
6 Trouble Shooting ..................................................................................................................................... 7
7 Repairs.................................................................................................................................................... 8
8 Warranty ................................................................................................................................................. 8
9 Engineering Information........................................................................................................................... 9
9.1
Wiring of Connectors ....................................................................................................................... 9
9.2
RS232C Interface Configuration..................................................................................................... 12
9.3
RS232C Communication................................................................................................................ 12
9.4
User Information and Recommendations........................................................................................ 16
VAT Vakuumventile AG, CH-9469 Haag, Schweiz
Tel ++41 81 771 61 61 Fax ++41 81 771 48 30 Email reception@vat.ch http://www.vatvalve.com
Installation, Operating, and Maintenance Instructions
ISO 9001
EN 29001
Series 64.1
PM-5
PM-4
225590EE
1/16
2005-04-26
Advertisement
Table of Contents
Related Manuals for VAT PM-5
Summarization of Contents
Intended Use of Product
Technical Data
Technical specifications including voltage, temperature, sensor signals, and power supply.
Installation
Content of VAT PM Controller Delivery
Lists all components included with the adaptive pressure controller.
Hardware Installation
Step-by-step guide for physically connecting the PM controller, valve, and sensors.
PM Configuration (Setup Sequence)
Detailed procedure for configuring the PM controller's setup sequence.
Operation
Local Mode Operation
Instructions for operating the PM controller locally via the service box.
Remote Mode Operation
Instructions for operating the PM controller remotely via interface.
Power Failure Handling
Explanation of controller behavior and options during power failures.
Preventive Maintenance
SRAM Maintenance
Procedure for exchanging the SRAM memory module.
Power-fail Battery Maintenance
Procedure for replacing the power-fail option battery.
Spare Parts and Retrofit Options
Spare Parts List
Lists available spare parts and their ordering numbers.
Trouble Shooting
Common Problems and Solutions
Identifies common issues and provides recommended troubleshooting steps.
Repairs
Repair Service Information
Guidance on contacting VAT for product repair services.
Warranty
Product Warranty Terms
Details the warranty coverage and conditions for VAT products.
Engineering Information
Wiring of Connectors
Pin assignments and wiring details for sensors, mains, and interfaces.
RS232C Interface Configuration
Settings for baud rate, parity, data length, and acknowledgements.
RS232C Communication
Explanation of RS232C control commands, inquiry commands, and error messages.
User Information and Recommendations
Guidance on optimal operation sequence and sensor signal resolution.
Need help?
Do you have a question about the PM-5 and is the answer not in the manual?
Questions and answers