Errm-Error Management - Kyocera FS C5020N - Color LED Printer Manual

ERRM-ERRor
Management
Function
This command sets the method for error handling when an error occurs.
Command/Parameters
Command ACNT "ERRM", #1, #2,#3;
Parameter #1 "ACCD": Account code error
"EXMN": Exceeded the maximum number of copy
#2 #1: "ACCD"
#1: "EXMN" "CNCL": Cancels printing.
#3 0: OFF
1: ON
Examples of Use
The following does not print an error report even if an account code error occurs:
!R! ACNT "ADMN", "123456789012345";
ACNT "ERRM", "ACCD", "PRNT", 0;
ACNT "EDAD";EXIT;
The following does not cancel printing even if the maximum number of copy is
exceeded:
!R! ACNT "ADMN", "123456789012345";
ACNT "ERRM", "EXMN", "CNCL", 0;
ACNT "EDAD";EXIT;
Description
• ACCD: ACcount CoDe error
• EXMN: Excess of Max. Number of copy
• CNCL: error job CaNCel
• PRNT: PriNT error report
• The error handling method can be set between the ACNT "ADMN"; and ACNT
"EDAD"; commands.
• If it is set to display an error only at the time of account code error occurrence,
printing is performed but the counters for all accounts are not incremented (the
counters are processed in the same manner as for the status page).
• Default values
Account code error
Exceeded the maximum
number of copy
"CNCL": Cancels printing.
"PRNT": Prints an error report.
"PRNT": Prints an error report.
* See the table bellow for default values.
Cancels printing
Prints an error report
Cancels printing
Prints an error report
26
ON
ON
ON
ON