Kyocera FS C5015N - Color LED Printer Operation Manual page 24

22
Property
Confirms and configures the settings of the selected printing system.
Note
All items which cannot be configured and those not supported by the printing system
are grayed out.
Model name
IP address/Host name
Serial number
Community name
Number of accounts
Base unit of maximum
output/ input
Available maximum
output/input
Last updated
Asset number
Accounting
Administrator Code
Print a report on illegal
account
Print a report on
exceeded maximum
output/input
Cancel a job on illegal
account
Cancel a job on exceeded
maximum output/input
Permit processing a job
without account ID
Copy counter
The model name.
The IP address or the host name.
The serial number of the printing system.
The community name.
The total number of accounts.
The base unit of maximum output/input. The maximum
output/input is multiples of the base unit.
The maximum output/input that is applied to the printing
system.
The date and time at which the counter is updated.
The asset number of the printing system.
Changes Accounting Administrator Code.
Determines whether an error report is printed when an
account ID error has occurred.
Determines whether an error report is printed when the
counter exceeds the maximum output/input.
Note
Depending on the printing system, this setting will be
grayed out. The same setting as Print a report on
illegal account is applied.
Allows you to configure whether or not to cancel an
incoming job if there is an error reported on the Account
ID.
Determines whether a job is canceled if the counter
exceeded the maximum output/input.
Determines whether a job without an Account ID is
permitted.
Determines whether to limit print count and copy count
together when applying the maximum output/input.
KM-NET for Accounting