TREND CDJ600 Manual

Dear Customer
Thank you for purchasing this Trend product,
we hope you enjoy many years of creative and
productive use.
Please remember to return your guarantee card
within 28 days of purchase.
CONTENTS
TECHNICAL DATA ____________________ 1
SAFETY ___________________________ 2-3
ITEMS ENCLOSED ____________________ 4
DESCRIPTION OF PARTS ______________ 5
ASSEMBLY
- CDJ300 __________________________ 6-7
- CDJ600 ___________________________ 8
- CDJ600 Sliding Edge Guide Stops ______ 9
- Mounting to Workboard ______________ 10
- Aligning Workpieces _________________ 10
- Clamping Bars & Knobs ______________ 10
- Template Comb Fitting & Adjustment ___ 11
- Setting up the Router ________________ 12
TEMPLATE SPECIFICATION ________ 14-17
TIMBER PREPARATION
- Lapped Dovetails ___________________ 18
- Box Joints (Accessory) _______________ 19
- Through Dovetails (Accessory) ________ 20
OPERATION
- Routing the Workpiece _______________ 21
- Standard 1/2"(12.7mm) Lapped D/tail _ 22-24
- 1/2"(12.7mm) Rebated Lapped D/tail __ 25-26
OPTIONAL ACCESSORIES
- 1/4"(6.35mm) Lapped 01 ___________ 27-28
- 1/4"(6.35mm) Rebated Lapped 01 ______ 29
- Box Comb 02 & 03 ________________ 30-31
- 32mm Centre Dowel 04 ____________ 32-35
- Through Dovetail 05 & 06 __________ 36-38
MAINTENANCE _____________________ 39
ENVIRONMENTAL PROTECTION _______ 39
SPARE PARTS
- Spare Parts List __________________ 40-43
- Spare Parts Diagram ______________ 44-46
TROUBLE SHOOTING ________________ 47
CDJ300 & CDJ600

TECHNICAL DATA

Dovetail cutter size
Max. workpiece width
CDJ300
CDJ600
Workpiece thickness
Max. router base dia.
Guide bush size
Weight CDJ300
CDJ600
The following symbols are used throughout this
manual:
Denotes risk of personal injury,
loss of life or damage to the tool
in case of non-observance of the
instructions in this manual.
Refer to the instruction manual of
your power tool.
Wear Personal Protective
Equipment (PPE). Ear, eye and
respiratory protection must be worn.
This unit must not be put into service until it has
been established that the power tool to be
connected to this unit is in compliance with
2006/42/EC (identified by the CE marking on the
power tool).

INTENDED USE

This accessory is intended to be used with a
portable router with suitable cutter, guide bush
and fine height adjuster fitted to cut dovetail
joints in natural timbers.
If you require further safety advice,
%
technical information or spare parts,
please call our Trend Technical
Support or visit www.trend-uk.com
-1-
12.7mm
300mm
600mm
12-25mm
180mm
15.8mm
6.2kg
11.3kg