Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pulsar Imp 6
Summarization of Contents
Chapter 1 Start Here
About this Manual
Explains the manual's purpose, structure, and how to find help.
About the IMP+ Level Monitoring System
Introduces the IMP+ system, its capabilities, and different models.
Functional Description
Details the ultrasonic measurement principle, configuration options, and features.
Product Specification
Physical
Specifies the physical dimensions, cable entry, and mounting details of the IMP+.
Environmental
Details the operating temperature range and IP rating for the IMP+.
Performance
Outlines the performance characteristics like processing, voltage, measurement range, and accuracy.
Standard features
Lists the basic features included with the IMP+ unit.
Additional features - 3wires
Highlights extra features specific to the 3-wire configuration of the IMP+.
PC interface
Describes the capabilities of the PC interface for diagnostics and software.
Chapter 2 Installation
Power Supply Requirements
Explains the DC voltage range and current draw for the IMP+ operation.
Dimensions
Provides detailed diagrams and measurements for IMP+ models.
Outdoor and Open Vessel Installation
Guides on mounting the IMP+ in outdoor or open vessel environments.
Terminal Connection Details
Describes how to connect the IMP+ in 2-wire and 3-wire configurations.
Preparation for Operation
Lists checks to perform before switching on the IMP+ unit.
Chapter 3 How To Use Your IMP+ Level Monitoring System
Operating the Controls
Explains how to interact with the IMP+ unit using its buttons and display.
Display
Describes the information shown on the IMP+ LCD display in different modes.
Program Mode
Details how to access and use the program mode for setup and configuration.
Button Functions
Explains the function of each of the four push buttons in Run and Program modes.
How to Access Program Mode
Provides steps to enter the program mode, including passcode entry.
Using The Menu System
Outlines how to navigate the IMP+ menu system for parameter access.
Factory Defaults
Recommends setting parameters to factory defaults upon installation or relocation.
Chapter 4 Getting Results With Your IMP+
Setting up Your Application
Guides on configuring the IMP+ for specific applications.
Using the 4-20 mA Output
Explains how to use the mA output for remote monitoring and data logging.
Using the Relays
Details how to configure the IMP+ relays for alarm or control functions.
Alarm Relay Set-up
Explains setting up relays for alarm functions, including ON/OFF setpoints.
Control Relay Set-up
Explains how to set up relays for process control functions (start/stop).
Loss of Echo Set-up
Describes how to configure a relay for Loss of Echo (LOE) fault indication.
Fail-safe Mode
Defines how the display and relays behave during a fault condition.
Setting Security Passcodes
Explains how to set and manage passcodes for program mode access.
Changing The Passcode
Details the procedure for modifying the existing passcode.
Resetting Factory Defaults
Guides on restoring all parameters to their original factory settings.
Checking the Software Revision and Serial Number
Explains how to find the unit's software revision and serial number.
Using the RS232 Serial Interface
Describes connecting the IMP+ to a PC for data and software management.
Chapter 5 Parameter Guide
Parameter Listing
Introduces the section detailing all available parameters within the IMP+.
Application (APP) Menu
Details parameters related to the operational mode and measurement units.
Relay (rL) Menu
Covers parameters for configuring relay types and functions for alarms and control.
Alarms
Details how to set up relays for alarm functions, including ON/OFF setpoints.
Control
Explains how to configure relays for control functions like starting or stopping processes.
Volume (UoL) Menu
Provides parameters for vessel shape selection and volume calculation.
Display (DISP) Menu
Details parameters for configuring display units, decimal places, and fail-safe modes.
mA Output (LOOP) Menu
Covers parameters for setting mA output levels, trims, and fail-safe behavior.
Compensation (CoP) Menu
Includes parameters for measurement offset and temperature source selection.
Stability (StA) Menu
Contains parameters for damping the display to manage fluctuations.
System (SyS1) Menu
Lists parameters for passcode, software revision, and serial number.
Test (tESt) Menu
Outlines self-test procedures for relays, display, and keys, and mA output.
Need help?
Do you have a question about the Imp 6 and is the answer not in the manual?
Questions and answers