US Robotics 56K MESSAGE MODEM - QUICK INSTALLATION GUIDE FOR WINDOWS Quick Installation Manual page 17

• Click the Diagnostics tab. Make sure that the correct COM port
(modem) is selected.
• Click the More Info button. You should see a series of commands and
responses from the modem. This means that the installation was a
success. If you do not see commands and responses, shut down and
restart your computer. To determine if your modem is functioning
properly, repeat the steps above. If your modem is still not working,
refer to the additional troubleshooting in this Guide.
Windows NT
Windows NT users must be in administrator mode to properly add any new
hardware.
• Click Start, Settings, and then Control Panel.
• Double-click the Modems icon. In the Modems Properties screen, you
should see a description for your new U.S. Robotics modem. If you do
not see your modem listed, shut down and restart your computer. To
determine if your modem is functioning properly, try reinstalling your
modem. If your modem is still not working, refer to the additional
troubleshooting in this Guide.
Windows 2000
Windows 2000 users must be in administrator mode to properly add any new
hardware.
• Click Start, Settings, and then Control Panel.
• Double-click the Phone and Modem Options icon. Click the Modems
tab. Make sure that your new U.S. Robotics modem is selected. If you
do not see a description of your modem, see the Note at the end of
this section.
• Click the Properties button.
• Click the Diagnostics tab.
• Click the Query Modem button. You should see a series of commands
and responses from the modem. This means that the installation was
a success. If you do not see commands and responses, shut down and
restart your computer. To determine if your modem is functioning
properly, repeat the steps above. If your modem is still not working,
refer to the additional troubleshooting in this Guide.
Windows XP
Windows XP users must be in administrator mode to properly add any new
hardware.
• Click Start and then click Control Panel.
Click Phone and Modem Options and then click the Modems tab. You
•
should see a description of your new U.S. Robotics modem and a
5