Table of Contents
Advertisement
modem and display make and model
information under the assigned port. All
currently active ports should display "Port
OK" under the heading. If a port displays a
"Port Error", it usually means that the port is
disabled in system setup.
NOTE:
Different systems and
BIOSes use different methods of
disabling COM ports. As a result,
we cannot provide support for
disabling/enabling COM ports.
Please refer to your system's
documentation or contact the
manufacturer of your system for
further information.
If you look at the information for the port your
modem is using, you will see three buttons.
These allow you to access Terminal and
40
U
M
S
SING
ODEM
TATION
Modem Configurator without going back to
the main menu. Extended Information provides
detailed information about your modem,
previous connections, firmware dates, etc. This
next section details using the Terminal option.
Using Terminal
You can access Terminal from either the Main
menu or the "Detect New Modems" screen.
Clicking Terminal brings up the "Terminal"
window.
Advertisement
Table of Contents
