Table of Contents
Advertisement
Diagnosis:
Optimum flow control settings may not be
enabled on your modem.
Possible Solution:
In terminal mode, type AT&F1 and press
ENTER to set hardware flow control.
Diagnosis:
Another software is running and conflicts
between programs may be causing the CRC
errors.
Possible Solution:
Close every program but the communications
program.
64
T
O
ROUBLESHOOTING AND
H
R
NLINE
ELP
ESOURCES
Diagnosis:
The remote site you are dialing into may have
trouble with the file transfer protocol.
Possible Solution:
Try using a different file transfer protocol. Do
not use Xmodem if other protocols are
available. Zmodem is the preferred protocol.
Diagnosis:
There may be a Terminate and Stay Resident
(TSR) program (such as a screen saver or
virus scanner) running in the background,
disrupting data communications.
Advertisement
Table of Contents
