Setting Up - Unix - Axis C1440AXIS - 1440 Print Server User Manual

Section 8 Setting Up - UNIX
Notes:
AXIS 1440 User's Manual
The AXIS 1440 supports LPR/LPD printing in several UNIX
environments. This section describes how to create LPR print queues
using the axinstall installation script and how to print to an LPR print
queue.
If you plan to use the AXIS 1440 in a multiprotocol environment, you
need to set it up for each environment in your network. See the
relevant sections in this manual.
Section 4 Performing Additional NetWare Setup on page 31
Section 5 Setting Up Windows Workstations on page 35
Section 6 Setting Up Macintosh Computers on page 47
Section 7 Setting Up OS/2 Workstations on page 49
You must assign an Internet (IP) address to the AXIS 1440 before
beginning these procedures. See Configuring the Print Server for
TCP/IP on page 23.
does not provide UNIX printer drivers for the
EPSON
printers. You must obtain these printer drivers from third-party
vendors.
The examples provided throughout this section are specific to a
BSD (Berkeley UNIX) system. System responses and print
filenames on other UNIX systems may be different. See your
UNIX documentation for more detailed information.
Some System V versions do not support LPD.
If you need more information about axinstall, visit the
Home Page at http://www.epson.com.
Section 8: Setting Up - UNIX
U U NIX
supported
EPSON
53