How To Use It - Axis C1440AXIS - 1440 Print Server User Manual

Note:

How to Use It

Installation and
Integration
Note:
Configuration and
Management
AXIS 1440 User's Manual
EPSON does not provide OS/2 or UNIX printer drivers for the
supported printers. You must obtain these printer drivers from
third-party vendors.
The following software is provided on the AXIS Utilities disks 1 and
2. Use the software appropriate for your environment to install and
configure the AXIS 1440. (See Installation and Setup Overview on page
16 for information about which software to use.)
• AXIS NetPilot™ (NetWare)
• AXIS Print Monitor (Windows 95/98 and Windows NT)
• AXIS Print Utility for Windows (Windows 3.1 and WfW)
• AXIS Print Utility for OS/2
• axinstall
The AXIS 1440 can be installed in the Macintosh environment
without any Axis software. However, you need an
network (AT) printer driver to use the print server. You can
download printer drivers from
http://www.epson.com.
If your network supports TCP/IP, you can use the AXIS 1440's
internal web pages to configure and manage the print server.
AXIS NetPilot is the recommended configuration and management
tool for NetWare networks.
See Section 9 - Management and Configuration for more information
on these tools.
Section 1: Introduction
EPSON
's Home Page at
EPSON
7