Setting Up Os/2 Workstations; Installation Using Axis Print Utility For Os/2 - Axis C1440AXIS - 1440 Print Server User Manual

Section 7 Setting Up OS/2 Workstations
Note:

Installation Using AXIS Print Utility for OS/2

AXIS 1440 User's Manual
Section 7: Setting Up OS/2 Workstations
This section explains how to set up a server workstation to create and
share AXIS 1440 print queues in an OS/2 environment.
If you plan to use your AXIS 1440 in a multiprotocol environment,
you need to set it up in each environment on your network. See the
relevant sections in this manual.
Section 4 Performing Additional NetWare Setup on page 31
Section 5 Setting Up Windows Workstations on page 35
Section 6 Setting Up Macintosh Computers on page 47
Section 8 Setting Up - UNIX on page 53
Since EPSON does not provide OS/2 printer drivers with the
supported printers, you must obtain these drivers from third-party
vendors.
Use the AXIS Print Utility for OS/2 to configure the AXIS 1440
printer port on your OS/2 workstation.
Install this utility on server workstations when printing in client-server
mode. (You don't have to install it on client workstations.) You'll find
the installation program for AXIS Print Utility for OS/2 in the
os2\install directory in the AXIS Utilities disk 1.
You can use the internal web server or AXIS NetPilot in a Win OS/2
window to change the default parameters of the AXIS 1440.
49