Related Manuals for Wacker Neuson PDT 3
Summarization of Contents
Foreword
California Proposition 65 Warning
Warning regarding chemicals in engine exhaust known to cause cancer and birth defects or other reproductive harm.
Copyright and Reproduction Rights
Details copyright ownership and restrictions on reproduction of the publication.
Safety Information
Safety Alert Symbol and Hazard Definitions
Explains safety alert symbols and defines DANGER, WARNING, CAUTION, and NOTICE hazard levels.
Laws Pertaining to Spark Arresters
Discusses regulations regarding spark arresters on internal combustion engines.
Compliance with Local Laws
Advice to consult distributors or administrators for local laws regarding spark arresters.
Operating Safety Guidelines
General safety guidelines for operating the machine, including training and fluid handling.
Engine and Service Safety Precautions
Safety measures for operating engines and performing maintenance or servicing.
Safety Label Locations
Illustrates the location of various safety and operational labels on the machine.
Meaning of Safety Labels
Describes the meaning of international pictorial safety labels used on Wacker machines.
Lifting Point and Sound Level Labels
Explains labels related to lifting points and guaranteed sound power levels.
Technical Data
Engine Specifications
Details engine make, model, power, spark plug, gap, speed, lubrication, fuel, and tank capacity.
Pump Specifications
Provides data on pump weight, suction/discharge head, flow, solid size, and temperature limits.
Sound Measurements
Specifies sound power and sound pressure levels according to relevant directives and standards.
Machine Dimensions
Provides dimensional data (A, B, C, X, Y, Z) for PDT and PDI models.
Operation
Pump Application
Describes the intended use of the pump for water with solids and typical applications.
Recommended Fuel
Specifies the required fuel type and advises on using fresh, clean gasoline.
Transporting the Machine Safely
Provides safety instructions for lifting and transporting the pump, including tie-down points.
Priming Pump
Explains the self-priming nature of diaphragm pumps and how to add water if needed.
Before Starting Checks
Lists pre-operation checks including safety, placement, hoses, and fluid levels.
Starting the Pump
Step-by-step instructions for starting the engine, including fuel valve, switch, and throttle settings.
Stopping the Pump
Instructions for safely stopping the engine, including throttle, switch, and fuel valve actions.
General Pump Operation
Guidelines for running the pump at full speed and troubleshooting priming issues.
Accessories
Mentions Wacker's offering of fittings, hoses, and clamps for pump connection.
Hoses and Clamps
Details requirements for suction and discharge hoses, and recommended clamps for connections.
Maintenance
Periodic Maintenance Schedule
A chart outlining basic machine and engine maintenance tasks based on time intervals or usage.
Engine Oil Change Procedure
Step-by-step instructions for draining and refilling the engine oil, including environmental considerations.
Air Cleaner Servicing
Instructions for servicing the dual element air cleaner, including cleaning and replacement of elements.
Spark Plug Maintenance
Guidance on cleaning or replacing the spark plug, checking electrode gap, and tightening securely.
Gear Case Oil Maintenance
Instructions for checking and changing the oil in the gear case, including plug locations and oil type.
Connecting Rod Bearing Greasing
Details on how to grease the connecting rod bearing using a hand-operated grease gun.
Pump Cleaning
Procedures for cleaning the pump after use, especially when pumping solids, to prevent damage.
Sediment Cup Cleaning
Steps to remove, clean, and reinstall the sediment cup and O-ring, and check for leaks.
Carburetor Adjustment
Instructions for adjusting the pilot screw and throttle stop screw for optimal engine performance.
Storage Procedures
Procedures for storing the pump for more than 30 days, including draining and oiling internal parts.
Troubleshooting Common Issues
A table listing common problems, their potential causes, and recommended remedies.
Decommissioning and Recycling
Guidelines for environmentally friendly recycling and disposal of the machine at the end of its life.
Need help?
Do you have a question about the PDT 3 and is the answer not in the manual?
Questions and answers