Ple Link - NEC PlasmaSync 42VP4D User Manual

58.AUTO ID SET START
Function
External control apparatus sets up ID automatically to two or more plasma
monitors.
Transmission Data
5FH 80H 60H F0H 01H DATA00 CKS
DATA00
*: when you use it by the multi-system, please remove the link input of a
.
master
*1
*1: "Master" means the 1st set of PDP at the time of cable connection at
the time of AUTO ID execution.

59.PLE LINK

Function
External control apparatus sets up equally PLE between two or more plasma
monitors.
Transmission Data
DFH 80H 60H F1H 03H DATA00 to DATA02 CKS
DATA00 00H:PLE LINK ON
DATA01 FFH
DATA02 FFH
*: This command is premised on the system configuration of two or more plasma
monitor being a multi-system. When renewal of the PSC data based on this
command is not carried out during a certain fixed period (about 2 seconds)
during PLE LINK enforcement, each plasma monitor sets PSC data as FFH.
Since this command is one-way traffic, there is no ACK.
*DATA01: Please set up FFH, when you publish this command from external
control apparatus. A master
own PSS data, the plasma monitor after the master which received this
command sets up the data of the larger one, and equips the output of a
command with it.
*DATA02: Please set up FFH, when you publish this command from external
control apparatus. The 1st round which PSS data has not decided is FFH.
00H~FFH: ID of a master
01H:PLE LINK OFF
sets up its own PSS data. As compared with its
*1
is set up.
*1
52