Installation - NEC PlasmaSync 42VP4D User Manual

Installation

VIDEO 1- 3
Note: This plasma monitor has the capasity to display images when connected to European DVD players with a SCART
output signal, which is RGB with composite sync.
Your dealer can supply a special SCART cable, which will enable you to use the RGB with composite sync signal.
To obtain the special cable as well as for further information, please contact your dealer.
Please refer to page E-25 for selection of the correct mode in the on-screen manager.
To video inputs on
the plasma monitor
DVD Player
To Mini D-Sub 15 pin connector on the plasma monitor
Personal computer with a
digital signal output
E-8
VCR or Laser Disc Player
Document Camera
• For Y/CB/Cr, connect to the DVD1 or DVD2 terminals.
• For SCART, this unit provides three ways to connect:
· SCART1...Connect R/G/B to the DVD2 terminals and
composite sync. to the HD terminal.
· SCART2...Connect R/G/B to the DVD2 terminals and
composite sync. to the VIDEO1 terminal.
· SCART3...Connect R/G/B + composite sync. to the RGB1 terminal.
IBM VGA or Compatibles
Macintosh or Compatibles
(Desk top type)
Monitor adapter for
Macintosh