Advertisement
TECHNICAL INFORMATION BULLETIN No. 080300
Models:
All Machete, A-Boom, Versa, Rear Mount, Slopemower,
Brahma, EKII, Hydro 60, Hydro 72 & Hydro 15
All Hydraulic powered Rotary Mower heads that utilize the
# 02960553B, 02960553C and 02968859A Spindle Assemblies.
Spindle Oil Filler Kit P/N 02976501:
A Spindle oil filler kit has been developed to provide accurate an easy fill of oil into the spindles
used on all hydraulic powered mowers. The Oil filler Kit P/N 02976501 is available through Alamo
Industrial Parts dept.
Installation requires the replacement of the fill plug with the female quick connect fitting. To
fill the spindle. attach the hose and oil bottle to the spindle by utilizing the quick connect fittings. remove
the vent plug and pump in the oil untill oil is seen at the vent plug opening. reinstall the vent plug and
remove the bottle at the quick connect fitting. The female quick disconnect is designed to be left on
the spindle in place of the fill plug.
Utilization of this spindle fill kit should decrease maintance time and failures by providing
accurate oil fill of the spindle assembly.
Spindle Assembly
Figure 1
This document does not authorize the repair or replacement of parts under warranty
MACHETE
© 2005 Alamo Group Inc.
Alamo Industrial ™ Technical Services Department
1502 East Walnut
Seguin, Texas 78155
830-372-2708
Female Quick Connect
Vent
Fill Plug (Removed)
Hose (with clamp)
Oil tank
(with Hand Pump)
1-36
Date:
Bulletin No:
Aug. 3, 2000
080300
Advertisement
