Advertisement
TECHNICAL INFORMATION BULLETIN No. 010896
Models:
All Machete Boom Mowers
Trouble shooting improper operation of motor starting circuit:
The correct operation of the motor is for the operator to pull out the Main Motor Switch and
then momentarily press the Motor Start Button. the Motor will advance to full operating speed and will
continue to run while the Main Motor Switch is in the OUT position.
If the harness is wired wrong, the motor will start as soon as the Motor Start Switch is pulled
out without pressing the Motor Start Button.
C
Pull
Circuit
The above illustration is the female connector of the motor wire harness
Corrective Action:
Using needle nosed pliers, push the B and C connectors out of the back of the plug and
reinstall them in the opposite positions, or cut the two wires to the B and C connectors and splice
them back together reversing them.
This document does not authorize the repair or replacement of parts under warranty
MACHETE
© 2005 Alamo Group Inc.
Alamo Industrial ™ Technical Services Department
1502 East Walnut
Seguin, Texas 78155
830-372-2708
Bulletin No:
010896
A
B
Hold
Circuit
1-8
Date:
Jan. 8, 1996
Advertisement
