TRENDnet TFC-1600MM Configuration Manual page 9

1-2-3 SNMP Configuration
Get Community Name: to get the device community name
Set Community Name: to set the device community name
Trap Community Name: to authorize the device trap community name
.
(default = public)
Trap Host IP Address: to set the trap host IP address
.
IP address)
Cold Start trap: to set the trap for rebooting the device
Authentication Fail Trap: to set the warning trap when the community
name of the device and workstation are different
Power Fail Trap: to set the Power Fail Trap
Fan Fail Trap: to set the fan fail trap
MC Plug-in Trap: to set the trap of the Media Converter module if it is
plugged in
(default = enable)
MC Pullout Trap: to set the trap of the Media Converter module if it is
pulled out
(default = enable)
Figure (7)
(default = enable)
.
.
(same as monitoring station
(default = enable)
(default = enable)
.
(default = enable)
.
.
(default = public)
.
(default = private)
.
.