Table of Contents
Advertisement
Configure through Web browser
The Media Converter chassis system is accessible using a Web browser (IE explorer,
Netscape Communications, etc.) to open up the chassis monitoring system. The default
IP Address for the chassis system is "192.168.1.1", and the default Login name and
password is both "root".
Configuration via Serial Port
The Media Converter chassis system can be accessible using a terminal or terminal
emulator attached to the RS232 serial port on the Switch too.
NOTE: (1) The serial port cable is attached directly with the device.
(2) It needs to upgrade the Terminal Emulator due to key malfunction.
1.
Locate correct DB9 serial port cable with female DB9 connector.
2.
Attach the DB9 serial port female cable connector to the male DB9 serial port
connector on the chassis system.
3.
Attach the other end of the DB9 serial port cable to a remote workstation.
4.
By default, the Switch uses the following serial port parameter values:
Bits per second
Stop bits
Data bits
Parity
Flow Control
57600
1
8
NONE
NONE
Advertisement
Table of Contents
