HUSKY LINERS X-act CONTOUR 53511 Care And Use Instructions

Thank you for selecting Xact Contour™ Front Floor Liners from Winfield Consumer
Products. Your new front floor liners are custom molded to fit your specific vehicle's floor
board. The liners are made to take the place of your factory floor mats. For correct fit,
it is necessary to remove the factory floor mats before installing your new floor
liners. However, do not remove the factory-installed carpeting.
When installing your driver's side floor liner make sure that the floor mat retention
hook on your vehicles floor board installs thru the retention hole in your floor liner. See
the "Left or Driver" image below.
Your liners are made from an engineering resin that is lightweight and extremely
tough and durable. The easiest way to clean your liners is with a damp cloth or sponge
and soap and water. Windex®, 409® and ArmorAll® type cleaners work as well.
LEFT OR DRIVER
HUSKY CAR MATS
CARPET HOOK FLOOR LINER
RETENTION
RIGHT OR PASSENGER
FLOOR MATS