Advertisement
Quick Links
53341
X-ACT CONTOUR
FLOOR LINERS
CARE AND USE INSTRUCTIONS – PN:53341
Thank you for selecting X-act Contour™ Front Floor Liners from Husky Liners Inc. Your new front floor
liners are custom molded to fit your specific vehicle's floor board. The liners are made to take the place
of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before
installing your new floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liners is with a damp cloth or sponge and soap and water. Windex®,
409® and ArmorAll® type cleaners work as well.
LEFT OR DRIVER
RIGHT OR PASSENGER
TO INSTALL DRIVER'S SIDE LINER SIMPLY POSITION LINER OVER EXISTING RETAINER AND PRESS
DOWN TO SEAT LINER OVER THE RETAINER. INCLUDED IN YOUR PACKAGING IS AN ADDITIONAL
RETAINING POST FOR THE PASSENGER SIDE. SEE INSTALLATION DETAILS ON THE BACK OF THIS
PAGE.
5334_Installation Instructions_R2
Advertisement
Related Manuals for HUSKY LINERS X-ACT CONTOUR
Summary of Contents for HUSKY LINERS X-ACT CONTOUR
- Page 1 CARE AND USE INSTRUCTIONS – PN:53341 Thank you for selecting X-act Contour™ Front Floor Liners from Husky Liners Inc. Your new front floor liners are custom molded to fit your specific vehicle’s floor board. The liners are made to take the place of your factory floor mats.
- Page 2 1) Pre fit your new X-act Contour floor liner in your vehicle (Image 1). 2) Insert the screw-in carpet retention screw into the bottom of the X-act Contour liner (Image 2). 3) Press down on the liner to pre-mark the carpet screw into the carpet (Image 3).
Need help?
Do you have a question about the X-ACT CONTOUR and is the answer not in the manual?
Questions and answers