SIMULATOR
The SupraPro I.D. has a simulator built into it
that can show a simulated bottom signal with
fish. All features of the SupraPro I.D. work
normally when the simulator is in use. You can
change the range, zoom, and use the alarms
as desired. To use the simulator, press the
menu key repeatedly until the SONAR SIM
menu appears. Now press the up arrow to turn
it on. Repeat the above steps to turn it off.
TRANSDUCER CONE ANGLES
The sound waves from the transducer spread out into the water in a
cone shaped beam. This looks much like the beam from a flashlight.
The angle between the outside edges of the cone is the cone angle.
Eagle offers a choice of transducers with either an 8 or 20 degree cone
angle. The SupaPro I.D. can use many of these, however it requires a
TA-301 adapter cable.The transducer supplied with the SupraPro I.D.
has a 20 degree cone angle. Typically, wide cone angle transducers (20
degrees) are ideal for operating in shallow to medium water depths. The
20 DEGREE
17
50'
100'
150'
200'
8 DEGREE