Table of Contents
Advertisement
INSTALLATION AND OPERATION MANUAL
EPA Certified
Wood-Burning
Fireplace Inserts
Save These Instructions
For Future Reference
P/N 900123-00, Rev. A, 04/2014
P900123-00
A French manual is available upon request. Order P/N 900122-00.
Ce manuel d'installation est disponible en francais, simplement en faire la demande. Numéro de
la pièce 900122-00.
101539175PRT-001
• Hot! Do not touch! The glass and surfaces of this appliance will
be hot during operation and will retain heat for a while after
shutting off the appliance. Severe burns may result.
• Carefully supervise children in the same room as appliance.
Wood-Burning Fireplace Inserts
Model Montlake™ ML230 and ML300
This appliance must be properly installed and operated in order to prevent the
possibility of a house fire. Please read this entire installation and operation
manual before installing and using your wood fireplace insert. Failure
to follow these instructions could result in property damage, bodily
injury or even death. Contact your local building or fire officials
to obtain a permit and information on any installation re-
quirements and inspection requirements in your area.
WARNING
Montlake™ 230 and 300
With Innovative Thermal Fin Technology (TFT™)
Advertisement
Table of Contents
Related Manuals for IronStrike Montlake 300
Summarization of Contents
Safety and General Information
IMPORTANT SAFETY AND WARNING INFORMATION
Crucial safety rules and warnings to prevent fire hazards and injury.
TESTING INFORMATION
Details on product testing, certifications, and compliance standards.
DRAFT REQUIREMENTS
Essential chimney draft requirements for optimal appliance performance and safety.
SELECTING THE PROPER VENTING SYSTEM
Guidelines for choosing the correct venting system to ensure safe and efficient operation.
CHIMNEY HEIGHT REQUIREMENTS
Requirements for chimney height to ensure proper draft and safety.
NEGATIVE PRESSURE WARNING
Warning about negative pressure in homes and its impact on appliance performance and safety.
Installation Procedures
INSERT INSTALLATION
General instructions for installing the fireplace insert.
MASONRY FIREPLACE PRE-INSTALLATION PREPARATION
Steps to prepare a masonry fireplace before installing the insert.
FACTORY-BUILT ZERO CLEARANCE FIREPLACES INSTALLATION PREPARATION
Installation preparation steps for zero clearance factory-built fireplaces.
FACTORY BUILT FIREPLACE WARNING TAG
Information about the warning label for modified factory-built fireplaces.
CHIMNEY LINER INSTALLATION
Instructions for installing a chimney liner, including specific requirements for Canada.
POSITIVE FLUE CONNECTION
Explanation of positive flue connection requirements, especially for Canada.
Offset Boxes
How to use offset boxes to align the flue outlet with the fireplace flue.
MANUFACTURED HOME INSTALLATIONS
Specific installation requirements for manufactured (mobile) homes.
BRICK AND BAFFLE INSTALLATION
Procedures for installing firebricks and baffle boards within the firebox.
POST INSTALLATION CHECKS
Final checks to ensure proper installation before first use.
ATTACHING CONTROL LABELS
Instructions for applying control labels to the appliance.
Operation and Performance
PAINT CURING
Procedure for curing the high-temperature paint on the appliance.
BURN-IN PERIOD
Guidance for the initial burn-in period to cure the appliance and remove moisture.
STARTING AND MAINTAINING A FIRE
Step-by-step guide on how to start and maintain a fire in the fireplace insert.
FUEL
Information on the type of fuel to use and not to use, along with seasoning guidelines.
GETTING THE MOST OUT OF YOUR FIREPLACE INSERT
Tips for optimizing the performance and efficiency of the fireplace insert.
MAXIMIZING YOUR FIREPLACE INSERT'S OVERALL EFFICIENCY
Strategies for achieving high combustion and heat transfer efficiency.
ACHIEVING CLEAN, LONG BURNS
Techniques for achieving clean and prolonged burns with the appliance.
BLOWER OPERATION
Instructions on operating the blower manually or automatically for optimal heat distribution.
Maintenance and Troubleshooting
DO'S AND DON'TS
A list of recommended practices and actions to avoid during operation and maintenance.
MAINTENANCE
General maintenance procedures for the fireplace insert.
GLASS REPLACEMENT INSTRUCTIONS
Step-by-step instructions for safely replacing the glass on the fireplace insert.
CREOSOTE FORMATION AND NEED FOR REMOVAL
Information on creosote formation, risks, and removal procedures to prevent chimney fires.
DISPOSAL OF ASHES
Safe procedures for disposing of ashes from the appliance.
TROUBLESHOOTING
Common problems and solutions for operating the fireplace insert.
Parts, Accessories, and Warranty
REPLACEMENT PARTS
Comprehensive list of available replacement parts for both models.
ACCESSORIES
List of optional accessories available for the appliance models.
THE WARRANTY
Details of the limited lifetime warranty coverage for the appliance.
PRODUCT REFERENCE INFORMATION
Section to record appliance details like model, serial number, and dealer.
Need help?
Do you have a question about the Montlake 300 and is the answer not in the manual?
Questions and answers