Display - GE Security DIGIA II User Manual

Display

Figure 13 shows the Display submenu.
Figure 13. Display
Table 9. Display submenu
Menu item
OSD
Timestamp
Sequence
Alarm display
Digia II Menu - Display
OSD
Disable
TimeStamp
Sequence
Alarm Display
Description
Check this box if you want the playback and record status bars to display.
Choose between Disable, Top, or Bottom to have the timestamping

display.

Note: If you enable timestamp, the timestamp becomes a permanent
part of the recording and cannot be removed from recorded
video.
Check this box to enable sequencing. Sequencing will automatically
switch the live view to the next available video feed where you have
enabled Sequence List in the Camera menu. It will switch to the next feed
after the defined dwell time interval.
Check this box to enable the alarm icons to display (A, M, V, F).
Chapter 3 19
Setup