System - GE Security DIGIA II User Manual

20 Digia II
User Manual

System

The System submenu has two submenus of its own. They are System date&time and System admin.
System date&time
Figure 14 shows the System date&time.
Figure 14. System date&time
Table 10. System date&time menu options
Menu item
Date/time format
Set date
Set time
Daylight savings
Start on
From
End on
From
Digia II Menu - System
<< System Date&Time
Date/Time Format
MM-DD-YYYY
Set Date
12-19-2006
Set Time
03:06:54p
Daylight Savings
Start On
APR
From
02:00a to 03:00a
End On
OCT
From
03:00a to 02:00a
Time Synchronize
Time Server
220.130.158.052
Time Zone
GMT
Time Update by
DAY
Description
Choose between MM-DD-YYYY, DD-MM-YYYY, and YYYY-MM-DD, and
between 12 HR and 24 HR.
Set the current date here.
Set the current time here.
Check this box if you want to enable daylight saving time.
Note: If you are setting up daylight saving time, check this box last
after you have specified all the other settings.
Choose the month that daylight saving time start. Also choose between
last, 1st, 2nd, 3rd, or 4th, and then choose the day of the week it applies
to.
Set the hour and minute at which you would like the time to change, and
set the hour and minute you want the time to change to.
Choose the month that daylight saving time ends. Also choose between
last, 1st, 2nd, 3rd, and 4th, and then choose the day of the week it applies
to.
Set the hour and minute at which you would like the time to change, and
set the hour and minute you want the time to change to.
>>
12 HR
TUE
LAST SUN
LAST SUN