Front Panel Overview - Lexicon REFLEX - REV User Manual

MIX
Controls the proportion of processed
(wet) to unprocessed (dry) signals sent
to the outputs.
INPUT
Sets the level of the incoming
signal.
INPUT
DYNAMIC
MIDI ®
REVERBERATOR
DRY
STORE (+)/CLEAR (–)
Toggles Store and Clear functions. When "+" is
displayed, holding stores the current effect to dis-
played register. When "–" is displayed, holding
designates effect to be skipped in a footswitch step
sequence. In Advanced Programming Mode, clears
any patches to the displayed parameter.
OUTPUT
Controls Reflex's output level.
PARAMETER/LEARN
Pressing selects front panel parameters: DECAY,
DELAY or FX LVL for adjustment with the VALUE
knob. Holding sets Reflex to the same channel as a
connected device, and activates patch assignment.
MIX OUTPUT STORE (+)/CLEAR (–)
WET
DISPLAY
Numeric display of digits +1-128, and decimal point.
Displayed digits indicate ID number of currently
running effect, or parameter values. Decimal point is
used as edit indicator and patch indicator depending
on mode of operation.
PARAMETER/LEARN VALUE
DECAY
DELAY
FX LVL
2

Front Panel Overview

REGISTER/PRESET
Button selects preset or register mode.
LED lights when register mode is selected,
turns off in preset mode.
Knob selects presets 1-16 or registers
1-128, depending on button setting.
REGISTER/PRESET
9 RICH PLATE
GATE 8
10 DRUMPLATE
INVERSE 7 11 VOCAL PLATE
SMALL ROOM 6 12 FLANGER
GUITAR STAGE 5 13 CHORUS
MUSIC CLUB 4
14 CANYON
PIANO HALL 3 15 MULTI TAPS
VOCAL HALL 2 16 RESONATOR
LARGE HALL 1
VALUE
Adjusts values of selected parameter.
Display of parameter values is indicated
by flashing of the selected parameter
LED.