Flanger - Lexicon REFLEX - REV User Manual

Depth
APM Parameter
Setting Name
1 Negative Feedback
2 Flange Depth
3 Effects Level
4 Right Delay Feedback
5 Right Delay
6 Shape
7 Left Delay Feedback
8 Left Delay
9 Flange Rate
10 – –
L Dly Fbk
L Delay Flange
R Delay Flange
R Dly Fbk
Shape
Rate
Sweep
Display Range
1 to 128
1 to 128
1 to 128
-128 to +128
1 to 128
1 to 8
-128 to +128
1 to 128
1 to 16
– –
Effects
Level
Actual Range
0-99%
.25-8.2ms
0-100%
-99 to +99%
0-1000ms
1-8 (arbitrary units)
-99 to +99%
0-1000ms
1-16 (arbitrary units)
– –
24

Flanger

This algorithm produces stereo flanging
with two flanges that can be used to create
different effects from left and right outputs.
This algorithm was used to create Preset 12.
Individual delays of as much as 1 sec-
ond, are provided, with separate feedback
controls for each delay, as well as rate and
shape controls for the flange. The flanging
effect is altered by recirculating the delays
with the feedback controls. Larger amounts
of feedback cause exaggerated "deep"
flanges.
The Negative Feedback parameter si-
multaneously controls both Left Delay Feed-
back and Right Delay Feedback,overriding
previously set relations between them. This
control applies slightly more feedback to the
left channel than to the right.
A3