10 DRUM PLATE The plate sound for
drums and other percussive instruments, but
also very useful for a variety of broadband
audio sources. Reverb time is very short and
dense.
11 VOCAL PLATE Designed specifically for
vocals, this plate is slightly dark and very
smooth. A slight predelay has been added to
separate the source from the reverb enve-
lope.
12 FLANGER A straightforward stereo
flange. DECAY controls the amount of feed-
back or resonance. DELAY varies the depth
and speed of the flange.
13 CHORUS The Chorus algorithm is a 6-
voice stereo chorus with an interesting twist
which allows for both Chorusing and Delay
effects. DECAY controls recirculation. DE-
LAY sets the delay line length. The CHORUS
preset has very short DELAY and a moder-
ate amount of diffusion.
14 CANYON A single, recirculating echo
effect. Slap echoes with DELAY set to mid-
range area, and longer (1.5 seconds max)
echoes with DELAY set in the upper range.
DECAY controls the number of recirculating
repeats. Creates stunning realism with the
original audio signal.
15 MULTI TAPS A 4-Tap bouncing delay
program with the bounce going back and
forth between left and right outputs. The
texture changes significantly as you vary
DELAY. Great on short staccato sounds.
Creates interesting blends with longer sus-
tained sounds. Most effective when outputs
are sent to a stereo return or stereo cabinet,
and panned full left/ full right.
16 RESONATOR Designed to mimic the
effect of resonance that occurs when holding
down the damper pedal on a piano. Adds a
fascinating color to any sound source.
9
Each of the presets contains a unique
version of the 3 parameters; DECAY, DE-
LAY and FX LVL. The parameters of each
preset are available for front panel adjust-
ment along their entire range, allowing you to
create hundreds of variations of each effect.
(As many as 7 additional parameters are
accessible in Advanced Programming Mode
or via MIDI.
Presets cannot be erased or overwritten
by parameter changes; the original version
will always be restored. If you make changes
to a preset and want to save the changes as
a custom effect, you must store your new
version in one of Reflex's 128 registers.
Need help?
Do you have a question about the REFLEX - REV and is the answer not in the manual?
Questions and answers