Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Leica T110
Summarization of Contents
Introduction
Special features
Highlights key functionalities and user benefits of the Leica T105/T110.
Important parts
Identifies and labels the main physical components of the theodolite.
Technical terms and abbreviations
Defines key terminology and abbreviations used in the manual.
Simple measurements
Unpacking
Guides the user through the initial unpacking and checking of the instrument.
Batteries
Explains battery types and their usage with the instrument.
Inserting / Replacing Battery
Provides step-by-step instructions for battery management.
Setting up the tripod
Details the procedure for stable and accurate tripod setup.
Centring with Laser Plummet, Coarse Level-Up
Explains how to position and roughly level the instrument.
Laser intensity
Covers adjustment of the laser plummet's brightness.
Centring with shiftable tribrach
Describes how to align the instrument using a shiftable tribrach.
Hints for positioning
Offers guidance on instrument placement in various scenarios.
Accurate levelling-up with electronic level
Details the process for precise instrument leveling.
Measuring
Explains how the instrument displays measurements after setup.
Setting Hz-direction
Guides on setting the horizontal direction for measurements.
Setting Hz-circle
Explains how to set the horizontal circle for specific measurement modes.
V-angle display
Describes how to switch the vertical angle display on or off.
Measuring Hz-angle
Provides methods for measuring horizontal angles.
Measuring V-angle
Details the procedure for measuring vertical angles.
Extending straight lines
Explains methods to extend a straight line in the field.
Staking out vertical lines
Describes techniques for marking vertical points.
Distance measuring with stadia lines
Covers methods for measuring distances using stadia lines.
Instrument errors
Line-of-sight error (Hz-collimation)
Explains the deviation between tilting axis and line of sight.
V-Index (Vertical index error)
Defines the deviation in vertical circle reading when the line of sight is horizontal.
Determining the line-of-sight error (c)
Provides steps to calibrate and determine the Hz-collimation error.
Determining V-index
Details the procedure for determining the vertical index error.
Configuration
Quick setting
Allows immediate access to common instrument functions.
Configuration menu
Accesses detailed instrument settings and parameters.
Setting the beep
Configures audible signals for key presses and right angles.
Setting V-angle
Allows selection of V-angle orientation (zenith or horizontal plane).
Setting display contrast
Adjusts the readability of the LCD screen.
Setting the angle units
Selects preferred units for angle measurements (degrees, gon, mil).
V-%
Explains the display of vertical angles as a percentage.
Displayed angle format
Configures how angles are displayed (e.g., degrees, gon, mil).
Switching on/off compensator
Manages the automatic compensator for leveling.
Switching on/off line-of-sight error correction
Enables or disables automatic correction for Hz-collimation error.
Safety Directions
Intended use of instrument
Defines appropriate applications and restrictions for the instrument.
Adverse uses
Lists improper and hazardous ways the instrument should not be used.
Limits of use
Specifies environmental conditions and limitations for safe operation.
Responsibilities
Outlines duties of manufacturers and users regarding safety.
Hazards of use
Warns about potential risks associated with instrument operation.
Laser classification
Details laser safety standards and classifications for the instrument.
Labelling
Explains the meaning of safety labels and symbols on the instrument.
Electromagnetic acceptability (EMV)
Discusses compatibility with electromagnetic fields and potential disturbances.
FCC statement (applicable in U.S.)
Provides regulatory compliance information for US users.
Care and Storage
Transport
Guides on safely moving and transporting the instrument.
Inside vehicle
Advises on secure transport of the instrument within a vehicle.
Shipping
Provides recommendations for shipping the instrument safely.
Storage
Details proper storage conditions to maintain instrument integrity.
Cleaning
Instructs on how to clean the instrument and its optical components.
Checking and adjusting
Outlines procedures for checking and adjusting instrument components.
Laser plummet
Explains how to check and potentially adjust the laser plummet.
Reticle
Describes how to check and adjust the instrument's reticle.
Messages and Warnings
Compensator out of measuring range
Explains the warning for compensator operation outside limits.
Battery empty
Indicates a low battery level and prompts for replacement.
System error
Alerts to internal system errors requiring service.
Hz-collimation (c)
Reports errors related to Hz-collimation determination.
V-index (i)
Reports errors related to V-index determination.
Temperature
Warns when the operating temperature is outside specifications.
Technical Data
Telescope
Lists specifications related to the instrument's telescope.
Angle measurement
Details the instrument's capabilities for angle measurement.
Circular level
Provides sensitivity specifications for the circular level.
Laser plummet
Lists technical specifications for the integrated laser plummet.
Compensator
Details the type and working range of the compensator.
Keyboard
Lists technical specifications related to the instrument's keyboard.
Automatic corrections
Specifies the types of automatic corrections applied by the instrument.
Tilting axis height
Provides measurements for the tilting axis height with/without tribrach.
Power supply
Details battery types, voltage, and operating life.
Type of tribrach
Lists specifications for different types of tribrachs.
Temperature range
Specifies the operating and storage temperature limits.
Need help?
Do you have a question about the T110 and is the answer not in the manual?
Questions and answers