Lexicon MRC V4.0 Owner's Manual Addendum page 35

Viewing and Editing Setup Edit Parameters
Setup Edit parameters are accessed by repeatedly pressing PAGE to scroll
through different sets of parameters. (Pressing and holding PAGE will show
the number of the page about to be displayed.) The function of each display
page in Setup Edit Mode is shown in the following table:
LXP-15 Setup Edit Display Pages
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Changes made to the parameters on these pages don't take effect until you
return to Machine Run Mode by selecting options 0 or 1 after pressing
ENTER or STORE. Descriptions of how to change parameters on each of
the Setup Edit display pages follow.
Editing the Setup Number and Algorithm
LXP-15
keypad
• Use slider/switch 4 to change the algorithm
• Use the number keys to change the setup number. The display will blink
when the number is changed. This is to remind you that the setup will
be stored in a new location.
3-22
Lexicon MRC V4.0/ MIDI Remote Controller
select setup # and algorithm
set Patch 1 parameters
set Patch 2 parameters
set Patch 3 parameters
set Patch 4 parameters
set name (characters 1–4)
set name (characters 5–8)
SETUP # Plate
Alg
SW 4