Motion Detection - D-Link DCS-3716 User Manual

Configuration
Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a finite motion area that will be used for monitoring.
Enable.Video.Motion:
Sensitivity:
Percentage:
Draw.Motion.Area:
Erase.Motion.Area:
D-Link DCS-3716 User Manual

Motion Detection

Select this box to enable the motion detection feature
of your camera.
Specifies the measurable difference between two
sequential images that would indicate motion. Please
enter a value between 0 and 100.
Specifies the amount of motion in the window being
monitored that is required to initiate an alert. If this
is set to 100%, motion detected within the whole
window will trigger a snapshot.
Draw the motion detection area by dragging your
mouse in the window (indicated by the red square).
To erase a motion detection area, simply click on the red square that you wish to remove.
Right-click on the camera image to bring up the following menu options:
Select.All: Draws a motion detection area over the
entire screen.
Clear. All: Clears any motion detection areas that
have been drawn.
Restore: Restores the previously specified motion
detection areas.
31