Network Setup - D-Link DCS-3716 User Manual

Configuration
Use this section to configure the network connections for your camera. All relevant information must be entered accurately.
LAN.Settings:
DHCP:
Static.IP.Address:.
IP.Address:
Subnet.Mask:
Default.Gateway:
Primary.DNS:
Secondary.DNS:
Enable.UPnP:
Enable.UPnP.Port.Forwarding:
D-Link DCS-3716 User Manual

Network Setup

Settings for your local area network.
Select this connection if you have a DHCP server running
on your network and would like your camera to obtain
an IP address automatically.
You may obtain a static or fixed IP address and other
.
network information from your network administrator
for your camera. A static IP address may simplify access
to your camera in the future.
Enter the fixed IP address in this field.
This number is used to determine if the destination is in
the same subnet. The default value is 255.255.255.0.
The gateway used to forward frames to destinations in a
different subnet. Invalid gateway settings may cause the
failure of transmissions to a different subnet.
The primary domain name server translates names to IP
addresses. This is usually the IP address of your router.
The secondary DNS acts as a backup to the primary DNS.
Enabling this setting allows your camera to be configured as a UPnP device on your network.
Enabling this setting allows the camera to add port forwarding entries into the router automatically on a UPnP
capable network.
25