Related Manuals for Vibe STEREO 4
Summarization of Contents
Mounting the VIBE Amplifier
Mounting Guidelines
Guidelines for mounting the VIBE amplifier safely and ensuring proper airflow for heat dissipation.
Amplifier Connections Guide
Ground Cable Connection
Details on connecting the ground cable directly to the vehicle chassis for optimal performance.
Remote Turn On Connection
Instructions for connecting the remote turn-on lead from the source unit to the amplifier.
RCA Cable Routing
Guidance on running RCA cables to avoid interference and ensure proper signal transmission.
Power Cable Installation
Information on selecting and installing the power cable, including fuse placement and cable gauge.
BlackBox Stereo 2 Controls
High Level Input
Using the provided loom to connect to the nearest speakers when RCA's are unavailable.
Low Level Input / Output
Connecting the source unit via RCA cables for low-level input and output functionality.
Gain Control Adjustment
Adjusting the input signal level to match the source and amplifier for optimal performance.
Bass Boost Function
Enabling extra bass boost at 45 Hz to enhance low-frequency output.
Low Pass Crossover Setup
Selecting the low pass filter frequency for audio output, ranging from 30 Hz to 300 Hz.
Crossover Mode Selection
Switching between high pass, low pass, or full range operation for speaker outputs.
High Pass Crossover Setup
Selecting the high pass filter frequency for audio output, ranging from 50 Hz to 1 KHz.
BlackBox Stereo 2 Features
Remote Bass Control
Connecting a remote bass controller to adjust gain from the driver's seat.
Indicator LED Status
Understanding the green (operation) and red (protection) LED indicators on the amplifier.
Power Connections
Details on correctly connecting the power supply to the amplifier unit.
Fuse Specifications
Information on the correct fuse rating for replacement, specified as 15 amp x 2.
Speaker Terminal Output
Connecting speakers to the amplifier's output terminals for sound reproduction.
BlackBox Stereo 4 Controls
Stereo 4 Low Level Input
Connecting the source unit's RCA output for a 4-channel output from a 2-channel input.
Stereo 4 High Level Input
Connecting to speakers using the provided loom when RCA's are not available.
Front Gain Control
Matching the input signal of the source to the amplifier for the front channels.
Front Crossover Filtering
Selecting filter type (LPF/HPF/FLAT) and frequency for front channels.
Front Bass Boost
Providing up to +24 dB of bass boost at 45 Hz for the front channels.
Rear Gain Control
Matching the input signal of the source to the amplifier for the rear channels.
BlackBox Stereo 4 Features
Rear Bass Boost
Providing up to +24 dB of bass boost at 45 Hz for the rear channels.
Rear Crossover Filtering
Selecting filter type (LPF/HPF/FLAT) and frequency for rear channels.
Rear Remote Bass Control
Connecting a remote bass controller to adjust rear channel gain.
Stereo 4 Indicator LEDs
Understanding the blue (operation) and red (protection) LED indicators for status.
Stereo 4 Power Connections
Details on correctly connecting the power supply to the amplifier unit.
Stereo 4 Fuse Rating
Information on the correct fuse rating for replacement, specified as 30 amp x 2.
Stereo 4 Speaker Output
Connecting speakers to the amplifier's output terminals for sound reproduction.
Black Box Bass 1 Controls
Bass 1 Low Level Input/Output
Connecting the source unit's RCA output and using daisy-chain for additional amplifiers.
Bass 1 Gain Control
Matching the input signal of the source to the amplifier for optimal performance.
Low Pass Filter Control
Setting the low pass filter frequency for the subwoofer, ranging from 40 Hz to 250 Hz.
Phase Control for Subwoofer
Adjusting subwoofer phase (0-180 degrees) to match other speakers for best results.
Subsonic Filter Function
Filtering out low frequencies (15-50 Hz) to protect the subwoofer and reduce distortion.
Subsonic Filter Switch
Enabling or disabling the subsonic filter for subwoofer output.
Bass Boost Control
Providing up to +18 dB of bass boost at 45 Hz for increased bass output.
Black Box Bass 1 Features
Bass 1 Remote Input Jack
Connecting a remote bass controller for on-the-fly bass level adjustment.
Bass 1 Indicator LEDs
Understanding the blue (operation) and red (protection) LED indicators for status.
Bass 1 Fuse Rating
Information on the correct fuse rating for replacement, specified as 35 amp x 4.
Bass 1 Speaker Output
Connecting the subwoofer to the amplifier's output terminals.
Bass 1 Power Connections
Details on correctly connecting the power supply to the amplifier unit.
Amplifier Setup Procedures
Gain Control Setup Routine
Routine for setting the amplifier's gain to match the source unit's output level.
Crossover Frequency Settings
Guidance on setting crossover frequencies for subwoofers, full-range, and passive crossover speakers.
Troubleshooting Common Issues
Amplifier Power Issues
Checks for power issues including ground, remote voltage, battery voltage, and fuses.
Protection LED Activation
Diagnosing issues when the protection LED is active, such as speaker shorts or overheating.
Amplifier Overheating
Troubleshooting steps for an amplifier overheating, checking impedance and airflow.
Blown Fuse Troubleshooting
Identifying causes of blown fuses and correct fuse ratings for each model.
Distorted Audio Diagnosis
Troubleshooting steps for distorted audio, checking gain, crossovers, and speaker wiring.
Product Warranty Information
Limited Warranty Details
Information regarding the twelve-month warranty, validation, and return procedures.
Need help?
Do you have a question about the STEREO 4 and is the answer not in the manual?
Questions and answers