Remote Access Settings - Western Digital WDA4NC20000 - ShareSpace NAS 2TB HD 1TB x 2 RAID User Manual

Import/Export Current Configuration
Important: Before doing a factory restore or a system update, you may choose to
save your drive's current configuration. Later you can import a
previously saved configuration, if desired. Keep in mind that
importing a configuration after restoring factory defaults does not
restore shares, users, or Twonky settings.
To save the current configuration:
1. In the Export section, click the Save Config File button.
2. Browse to the location where you want to save the file and click the Save
button.
To replace the current configuration:
1. In the Import section, click the Choose File button and browse to locate the
replacement file.
2. Click the Import button, and when the confirmation message displays, click OK.
The My Book Live reboots.

Remote Access Settings

The Remote Access page enables you and other users to access your files on the
go. You can access photos and files stored in the My Book Live using the
WD Photos and WD 2go mobile apps and set up remote and secure web access to
stored files by means of the WD2go.com website.
For instructions on setting up remote access on this page and then using the
WD Photos and WD 2go, see "Accessing Your My Book Live Remotely" on page 98.
MY BOOK LIVE
USER MANUAL
CONFIGURING BASIC SETTINGS
74