Secure Socket Layer (Ssl) Settings; Uninterruptible Power Supply (Ups) Settings; Web Access Protocol Settings; Workgroup And Domain Settings - Seagate ST320005LSA10G-RK - BlackArmor 2 TB NAS 220 Network Attached Storage Server User Manual

Secure Socket Layer (SSL) Settings

Note: Only people familiar with SSL should try adding SSL support to the BlackArmor server.
SSL (also known as Transport Layer Security) is a type of encryption used to protect data
being sent over a network or the Internet. SSL uses a system of keys, like secret passwords,
to send and receive files securely. See "Web Access Protocol Settings" on page 43 for more
information.
You add SSL support to your BlackArmor server by entering an SSL certificate and key pair.

Uninterruptible Power Supply (UPS) Settings

An uninterruptible power supply is a power supply that has a battery in it that maintains power
to a computer or server in the event of a power failure.
A UPS is intended to provide enough power for you to save whatever files you're working on
and properly power off the computer or server; it's not meant to keep any system running for
the duration of a power failure.
You can connect your BlackArmor server to a UPS and customize the UPS settings in
BlackArmor Manager. You can specify when you want the UPS to power off the BlackArmor
server if you are not present at the time. You can choose to have the server shut down when:
• The battery life of the UPS reaches 15% of full power or the battery has five minutes of
life left, or less.
Or,
• A specified amount of time has passed since the power failure began. (You can specify
the amount of time.)

Web Access Protocol Settings

By default, your BlackArmor server is set to the HTTP Web access protocol. HTTP stands for
Hypertext Transfer Protocol and is the most common way that data and files are stored on
the Internet.
You can set your BlackArmor server to use HTTPS (HTTP over Secure Socket Layer) if you
have set SSL on the server. (See "Secure Socket Layer (SSL) Settings" on page 43.)

Workgroup and Domain Settings

By default, your BlackArmor server is set as a workgroup. A workgroup is a number of
computers on a network that share resources. You can add any computer to the server's
workgroup, or you can add the server to an existing workgroup.
Alternatively, you can set your BlackArmor server as a domain member. A domain is a group
of computers administered as a single unit from a central location.
When you add the BlackArmor server as a domain member, it is centrally managed by a
Windows domain controller, which provides another level of security when users attempt to
BlackArmor® NAS 220 User Guide (Version 2)
Changing the BlackArmor Server's Advanced Settings
43