Protecting Your Blackarmor Files With Network Backups - Seagate ST320005LSA10G-RK - BlackArmor 2 TB NAS 220 Network Attached Storage Server User Manual

Protecting Your BlackArmor Files with Network
Backups
You can set up NAS to NAS backup, where a permanent link is created between your
BlackArmor server and another server on your network, and automatic and continuous
backups of your BlackArmor server take place. These continuous backups provide the best
protection against data or device loss, especially if the second server is located in a different
building or part of the city (or country) than your BlackArmor server.
BlackArmor Client
Use BlackArmor Manager to set up the network connection between the two servers—the
BlackArmor Client (where your BlackArmor users' files are stored) and the BlackArmor
Server (where the copies, or replicas, of the files are stored)—and begin the initial backup.
You can then use BlackArmor Manager to schedule recurring backups.
To back up from your BlackArmor® server to another server on your network, you first need
to enable the Backup Service.
1. Open BlackArmor Manager (see page 19).
2. In the menu bar, select Storage, then click Backup Manager.
3. In the Storage menu on the left side of the window, click Server Setting.
4. Click the check box beside Backup Service.
The authentication information displays. This information is used when restoring backed up
files.
5. Enter an authentication name and password for all aliases.
BlackArmor® NAS 220 User Guide (Version 2)

Protecting Your BlackArmor Files with Network Backups

Administrator Computer
Original source files
stored here
BlackArmor Server
Copies of files
stored here
(destination)
38