Monitoring Status With The Server's Leds - Seagate ST320005LSA10G-RK - BlackArmor 2 TB NAS 220 Network Attached Storage Server User Manual

Monitoring Status with the Server's LEDs

Your BlackArmor server has three LEDs to help you monitor the status of its components.
(See the illustration on page 10 for help locating the LEDs.)
Table 2: Front and Rear Panel LEDs
LED
Power
System Status
Hard Drive Status
LAN Port
Using the LEDs to Monitor the Server
1. The System Status LED will indicate when there's a problem. When it's blue, the server
and its components are working properly.
If the System Status LED turns amber, a problem has occurred. This may indicate that a hard
drive has failed.
2. Check the LAN port LEDs on the back of the server to see if there is a network problem.
If the LAN port LEDs have gone off, you may have lost your network connection. See "Solving
Problems" on page 53 for help solving the problem.
BlackArmor® NAS 220 User Guide (Version 2)
State and Color Indication
Front Panel LEDs
Solid Blue Server is powered on
Off Server is powered off
Solid Blue Server is ready for use
Blinking Blue Server is powering on
RAID is rebuilding
Solid Amber Server has a system, RAID or hard drive error
Solid Blue Drive is ready
Blinking Blue Drive activity
Rear Panel LEDs
Off Port has no network connection
Blinking Orange (L) Link activity
Green (R) Network connection
Monitoring Your BlackArmor Server
40