Initial Setup, Ip Address, And Login Password; Defaults - NETGEAR ReadyNAS 4200 Hardware Manual
Hide thumbs
Also See for ReadyNAS 4200:
- Hardware manual (56 pages) ,
- Software manual (135 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
ReadyNAS 4200 Hardware Manual
Initial Setup, IP Address, and Login Password
Follow the instructions in the NETGEAR ReadyNAS Installation Guide that came with your
unit to install it. An electronic copy of the installation guide is on the product CD, on the
NETGEAR website, and on http://readynas.com/documentation.
Defaults
Estimated setup time is about 20 minutes.
Default IP configuration: set to DHCP; if the unit does not get an IP address, it defaults to
•
192.168.168.168.
Default administrator user name: admin
•
Default password: netgear1
•
Both the user name and password are case-sensitive.
For information about using ReadyNAS 4200 RAIDar and FrontView software to log in,
configure, and manage your system, see the ReadyNAS for Business Software Manual.
Chapter 1: Getting Started
| 11
Advertisement
Table of Contents
