Default Boot Sequence - HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS Server User Manual
Hp storageworks x1000 and x3000 network storage system user guide (5697-0185, november 2009)
Hide thumbs
Also See for X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS Server:
- User manual (68 pages) ,
- Release notes (10 pages) ,
- Installation instructions (3 pages)
Table of Contents
Advertisement
NOTE:
In the HP Array Configuration Utility (ACU), logical disks are labeled 1 and 2. In Microsoft Disk
Manager, logical disks are displayed as 0 and 1. For HP Smart Array configuration information, see
http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/.
If the operating system has a failure that might result from corrupt system files, a corrupt registry, or
the system hangs during boot, see
Default boot sequence
The BIOS supports the following default boot sequence:
1.
DVD-ROM
2.
HDD
3.
Bootable USB flash drive
4.
PXE (network boot)
Under normal circumstances, the storage systems boot up from the OS logical drive.
•
If the system experiences a drive failure, the drive displays an amber disk failure LED.
•
If a single drive failure occurs, it is transparent to the OS.
"System
recovery" on page 109.
X1000 and X3000 Network Storage System
25
- Quick Links:
- Hp X1400 Network Storage System and...
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS Server and is the answer not in the manual?
Questions and answers