Lexmark X651De, X652De, X654De, X656De, And X658De - Lexmark 25C0010 - X 500n Color Laser Manual

It is possible to duplex certain labels that have been specifically designed for this application. To duplex labels, consult
the Lexmark "Converter Lists" to see which converters have successfully developed this type of label, and you must
install a special fuser wiper. The wax wiper that is used with the X644e and X646e is P/N 40X2666 (Cartridges designed
for duplex label printing contain two wax wipers. Change the wax wiper at the halfway point of your normal cartridge
usage to provide additional cleaning and optimize performance.)
When printing on labels:
•
Set the Paper Type to Labels in the Paper Menu. For vinyl and other heavy labels, set the Paper Type to Vinyl
Labels.
Note: When Paper Type is set to Vinyl Labels, the printer reduces the printing speed to ensure acceptable printing.
•
Do not load labels together with paper or transparencies in the same paper tray. Combining print materials can
cause feeding problems.
•
Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive
material may contaminate your printer. It could also void your printer and cartridge warranties.
When feeding labels, the number of labels per sheet can affect registration more than basis weight. Typically, the
more labels per sheet, the better the registration.
When printing on card stock:
•
Set the Paper Type to Card Stock in the Paper Menu.
•
Do not use card stock that is creased. It may cause paper jams.
For more information, see the following:
•
"Pick roller technology" on page 11
•
"Grain orientation" on page 16
•
"Maintenance procedures" on page 13
•
"Troubleshooting" on page 13
Lexmark X651de, X652de, X654de, X656de, and
X658de
The Lexmark X651de, X652de, X654de, X656de, and X658de print on many labels designed for use with laser printers.
Printer specifications
108