Lexmark 25C0010 - X 500n Color Laser Manual page 14

Solutions to printing problems
Problem
Print on heavy stock is
blurred or out of focus.
Toner rubs off the page.
Printing shows voids.
Solution
Make sure the Paper Type setting is appropriate for your print material. (Card stock in excess
2
of 203 g/m [54-lb bond] may not produce acceptable print results.)
Print five sheets of paper, wait approximately five seconds, and then print five more sheets
of paper to remove any toner that may have accumulated.
Make sure the Paper Type setting is appropriate for your print material.
Use a lighter weight stock. (The material being used should be lighter than 300 g/m
Print five sheets of paper, wait approximately five seconds, and then print five more sheets
of paper to remove any toner that may have accumulated.
Change the Paper Type to Plain Paper.
Print five sheets of paper, wait approximately five seconds, and then print five more sheets
of paper to remove any toner that may have accumulated.
General information
14
2
.)