Security Menu - Setting The Security Features - Fujitsu M2010 - Mini-Notebook - Atom 1.6 GHz Bios Manual

SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs
and to view the current data security configuration. (See
Navigating through the Setup Utility on page 2 for more
information.)
The following tables show the names of the menu fields
for the Security Menu and its submenus, all the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use. The default condition
is no passwords required and no write protection.
Remember your passwords! If you set and
forget your User and Master hard disk
passwords, Fujitsu Computer Systems will
not be able to reset it. You may lose data
and have to replace your system board or
hard disk drive.
Info
Supervisor Password Is:
User Password Is:
Set Supervisor Password
Set User Password
Password on Boot:
F1 Help
ESC Exit
Phoenix SecureCore(tm) Setup Utility
System Advanced Security
Clear
Clear
[Enter]
[Enter]
[Disabled]
Select Item -/Space
Select Menu Enter
Figure 5. Security Menu
S e c u r i t y M e n u
Entering a password incorrectly 3 times in
■
a row causes the keyboard and mouse to
be locked out and the warning [System
Disabled] to be displayed. If this hap-
pens, restart the computer by turning off
and on the power with the power switch
and use the correct password on reboot.
■ If you make an error when re-entering
the password a Warning will display on
the screen. To try again press [Enter],
then retype the password. Press [Esc] to
abort the password setting process.
Boot Exit
Item Specific Help
Press <Enter> key to
set Supervisor Password
to enable any password
features.
Then password entry is
required to enter BIOS
Setup.
Change Values F9
Select Sub-Menu F10
Setup Defaults
Save and Exit
9